Ii-1. Access Point Mode - Edimax EW-7428HCn User Manual

II-1. Access Point Mode
Access Point Mode allows the device to broadcast a wireless Internet signal,
which your wireless devices – such as a notebook computer, a smartphone, or
a tablet computer – can connect to.
1. Select Access Point Mode from the iQ Setup list.
2. You will be asked if you want to change the login information for this device.
For now, simply click 'NEXT' without changing anything. You will later have
an opportunity to change this in the browser-based setup, should you wish.
Note: If you changed the username and password in
this step, you will be prompted to relogin. Enter the
new information into the login prompt.
3. You will be prompted to set the device's access point settings. If you want
to, you can give the device an ID in the 'Device Name' field, and if you want
to set a Wi-Fi password, select 'Enabled' from the drop-down menu and
enter your desired password in the 'Wi-Fi Network Password field'.
Otherwise, if you keep the default settings, the device's wireless network
will have the default ID of 'Edimax' and will use no password.
14