Edimax EW-7428HCn User Manual page 83

N300 high power ceiling mount wireless poe range extender/access point

Hide thumbs Also See for EW-7428HCn:

Table of Contents

5. Connect one end of an Ethernet cable to the Ethernet port on your

computer. Connect the other end to an Ethernet port on the access point.

6. Plug the power adapter into the device's 5V power port, and plug the

adapter into a wall socket. The PWR LED and corresponding LAN LED should

light up.

7. Network Preferences will now display an Ethernet adapter, as shown below.

The status of "Ethernet" should be "Connected".

Table of Contents