Edimax EW-7428HCn User Manual page 34

Site Survey
Click "APPLY" to make changes take effect. The following message will appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
Wireless Site Survey
When you click the "Select Site Survey" button, a "Wireless Site Survey Table"
will pop up. It will list all available access points nearby.
If you don't see the SSID of the access point you wish to connect to, you may
try clicking the "Refresh" button. It is also possible the access point has hidden
When you use this device to give an
Ethernet network device wireless capability,
you have to associate it with a working
access point. Click the "Select Site Survey"
button, and a "Wireless Site Survey Table"
will pop up. It will list all available access
points nearby. Select one access point in the
table for this device to connect to. (Please
see below)
34