Edimax EW-7428HCn User Manual page 63

IP Address
Subnet Mask
Gateway
Address
Typically, your ISP will provide you with such information as IP address, subnet
mask and gateway address.
Note: Please write down and remember the new IP
address you assigned to the access point. If you
forget this IP address you will not be able to connect
to the browser-based configuration interface in the
future.
Note: To reset the IP address back to its default
value of 192.168.2.2, press and hold the WPS
button on the access point for 10 seconds. Be aware
that doing so restores all settings and passwords
back to factory defaults.
Click "APPLY" to make changes take effect. The following message will appear:
Specify an IP address here. This IP address
will be assigned to your access point, and
will replace the default IP address
192.168.2.2.
Input the subnet mask of the new IP
address.
Input the network's gateway IP address.
63