Bottom Panel - Hand Held Products 7900L00-414C50E - Dolphin 7900 User Manual

COMM LED
Indicates the status of data transfer between the host device and the Dolphin terminal
COMM LED Color
Red
Green
Orange

Bottom Panel

Power
Supply
Connector
Power Supply Connector
Attach a power cable from Hand Held Products to this connector. The Mobile Base can be powered by an external
DC power source between 11 VDC to 48 VDC. To run on vehicle power, you can use the 12 VDC cable or 24 VDC
cable option. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette
lighter outlet. The 24 VDC, pigtail cable can be used to "hard-wire" into the vehicle power bus.
Verify that the power source is always within the specified range and observe correct input voltage polarity. An improper input
!
voltage range (above the 48 VDC maximum) or reverse polarity could damage the power conversion circuitry.
Dolphin® 7900 Series User's Guide
Downloaded from www.Manualslib.com
Indicates that...
Data is being sent from the host device to the Dolphin Mobile Base.
Data is being sent from the Dolphin Mobile Base to the host device.
Data is being sent at high data rates.
manuals search engine
Rev D
RS-232 Serial
Communications
Port
14 - 3