System Tab
The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings
> System tab. Tap the appropriate icon to open that system setting.
About
The About system setting displays specific information about what is loaded on the terminal. It contains three tabs:
Version tab
Device ID tab
Copyrights tab
Backlight
The Backlight system setting enables you to customize backlight functionality for the display. For more information, see
the Backlight
on page
Certificates
This system setting is designed to manage certificates for 802.11b networks. However, on Dolphin terminals, you manage
certificates through Meetinghouse; see
ClearType Tuner
This system setting enables you to adjust the level ClearType font rendering by moving a slider. The sample text displays the
setting results immediately. Of course, you must first enable ClearType font rendering to change the appearance of fonts on the
screen; see
ClearType Tab
Clock & Alarms
This setting sets the system clock. Appointments, scheduled events, and any function on a schedule runs off this setting. You
need to set the time zone and time after each hard reset; see
Dolphin® 7900 Series User's Guide
Downloaded from
www.Manualslib.com
Displays the information about the software, operating system, and processor of the terminal.
Displays the information the terminal uses to identify itself to other devices. It can be important to
know this information if the Dolphin terminal is going to be part of a networked system of devices.
Device name:
Displays the system's default name. This is the name used by ActiveSync.
Description:
Displays the description of the device ID.
Displays important copyright information.
4-3.
Installing Certificates with CertAdd
on page 7-13..
manuals search engine
on page 9-29..
Setting the Time and Date
on page
Rev D
Adjusting
-7.
7 - 7