802.11b Settings
You can access the configuration utility two ways:
1. Tap Start > Settings > System tab > 802.11b Settings.
The icon appears on the System tab only if there is an 802.11b radio installed on the terminal.
2. Tap the Status icon
The 802.11b Settings utility consists of four tabs: Status, Config, Advanced, and About. Each tab is described in its own section
in this chapter.
Status Icons
This configuration utility contains icons that indicate the status of the network.
Icon
This icon means...
Excellent signal strength. Excellent connection.
Poor signal strength. Poor connection.
Radio disabled. No radio connection.
(Access Point) AP Mode.
Peer Station, Peer-to-Peer Mode.
WEP enabled. Network needs a WEP Key to connect.
WEP disabled. Network does not need a WEP Key to connect.
Mismatched WEP Key configuration with your network.
Online help button.
9 - 2
Downloaded from
www.Manualslib.com
in the system tray - see
manuals search engine
Using the Status Icon
on page
Rev D
9-9.
Dolphin® 7900 Series User's Guide