Hand Held Products 7900L00-414C50E - Dolphin 7900 User Manual page 75

Storage Card Tab
IPSM
Storage Card
Running Programs Tab Displays the software programs currently using Storage memory.
Check this tab when you are receiving out of memory errors or when the mobile computer is running slowly. You can
• Select a program in the list and tap Stop to stop it from running (and therefore from using memory), or
Dolphin® 7900 Series User's Guide
Downloaded from www.Manualslib.com
This tab displays the current capacity and usage statistics of the selected memory type; IPSM or
Storage Card. Select the memory type from the drop-down list. IPSM is selected by default.
Total storage card
memory
In use
Free
Short for Intel Persistent Storage Manager, this is14MB of on-board Flash memory that is non-
volatile. Because this memory is non-volatile, data or programs stored in IPSM are not affected when
power is removed. Autoinstall programs, for example, are stored in IPSM so that they are always
installed at cold-boot startup.
When IPSM is selected in the drop-down list, the Storage Card tab displays the IPSM memory
capacity and usage statistics.
You can install additional memory in Dolphin terminals - see
card is installed in the terminal, a Storage Card entry appears in the drop-down list.
Select Storage Card and the Storage Card tab displays the current capacity and usage statistics of
the installed storage card.
manuals search engine
The total MB of memory capacity of the selected memory.
The MB currently being used.
The MB that is still available for use.
Rev D
Access Door on page 3-6. If a storage
7 - 9