Pip (Picture-In-Picture); Operation - ProScan PS32130 User Manual

PIP
(PICTURE-IN-PICTURE)
OPERATION
The PiP feature (picture-in-picture) lets you display a second, smaller
_icture on top of the main picture.
Main Picture
There are six remote buttons that control the way the PIP window works:
PIP Brings up the PIP window. Press PIP again to remove the window.
MOVE PIP Lets you move the PIPwindow to the four corners of the
screen. (You can also use the MOVE arrows to position the PIP window.)
FREEZE Takes a snapshot of the video in the PIP window. To unfreeze
the video, change channels in the PIP window or press SWAR
SWAP Switches, or "swaps," the video from the PIP window with the
main picture.
CH CTRL (Channel Control) Pressing PIP automatically places channel
control in the PIPwindow. CH CTRL lets you transfer channel control
back to the main picture.
Press CH CTRL again to return the channel control to the main picture.
SCAN Pressing SCAN causes the TV to automatically scan through
your channel list. If channel control (see above) is on the main picture,
the main picture will scan through the channels. If channel control is
on the PIPwindow, the PIP picture will scan through the channels.
Each channel is displayed for four seconds before the TV automatically
tunes to the next channel in the list.
If you press FREEZE before the PIP
window is displayed, the current
channel's video is frozen in the PIP
window, allowing you to change
channels on the main picture while
keeping the snapshot of the original
channel in the PIP window.
A typical use of SWAP is to scan
through channels in the PIP window,
and when you find a channel you like,
press SWAP to display that channel
in the main picture, sending the
current channel to the PIP window.
5O