ProScan PS32130 User Manual page 68

TV, VCR,
AND SATELLITE RECEIVER
This information applies to Connection G in the Connections Foldout.
Connection G provides:
• Sereo sound from broadcast programs
• Stereo sound from VCR
• Picture in Picture (PIP)
• Viewing one channel on TV while recording another channel
To use this connection you must have:
• (4) coaxial cables
• (6) audio/video cables
• (2) S-Video cables (optional)
To connect:
1. Connect cables as shown in Connection G.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION G
To watch TV programs:
1. Turn VCR and satellite receiver off.
2. Press TV ,71,nd t une to a channel.
To watch satellite programming:
I. Press SAT-CABLE and tune to a channel.
To record off-air broadcasts and watch a different channel:
I. Turn satellite receiver off.
2. Press VCR1 and tune to a channel.
.3. Begin recording.
4. To watch another channel, make sure the TV/VCR switch on the
VCR is set to TV; then press TV and tune to a channel.
To play a tape on the VCR:
I. Press VCRI and then press PLAY.
VCR I E
See Connections Foldout, Connection G
65