ProScan PS32130 User Manual page 71

TV, (2) VCRs, AND
SATELLITE
RECEIVER
This information applies to Connection I in the Connections Foldout.
Connection I provides:
• Stereo sound from broadcast programs
• Stereo sound from VCR
• Picture in Picture (PIP)
• Viewing one channel on TV while recording another channel
To use this connection you must have:
• (5) coaxial cables
• (9) audio/video cables
• (2) S-Video cables (optional)
To connect:
1. Connect cables as shown in Connection I.
2. Return to First Things First, then follow the steps in the
interactive Setup.
68
USING CONNECTION
I
To watch TV programs:
I. Turn VC_Rand satellite receiver and laserdisc player off.
2. PressIV and tune to a channel.
To w_atch satellite programming:
I. Press SAT-CABLE and tune to a channel.
To record from one VCR to the other (tape dubbing):
1. Turn satellite receiver off.
2. Insert original tape into VCR2.
3. Insert blank tape into VCR1.
4. Press VCR1.
5. Set VCR to line input (for more, see your VCR User Manual).
6. Press RECORD to begin recording.
7. Press DVD-VCR, then press PLAY.
8. If you want to watch a different channel, set the TViVCR switch on
both VCRs to TV; press TV; then tune to a channel.
CABLE8OX
DSS
RECEIVER
VCR 1
VCR 2
TV
See Connections Foldout, Connection I