Set The Vcr2 Qld Channel - ProScan PS32130 User Manual

SET THE VCR2,LD CHANNEL
The fifth step lets you set the VCR2.LD channel. When you set the
VCR2. LD channel, you're telling the TV what channel to tune to
when you press the VCR2. LD button on the remote.
For example, if you have a laserdisc player connected to the Video 2
input jacks on the back of the TV, you want the TV to tune to the
Video 2 input channel when you press VCR2oI_D. If you don't have a
VCR2.LD component connected to the TV, skip this step or select Not
Connectedffom VCR.LD Channel choice list. (For more, see Auto
Tuning, page 45.)
1. Press MENU to bring up the VCR2oLD choice list.
2. Point to the choice that matches the way you have your second
VCR or laserdisc player connected to the TV.
If you used the Connections Foldout to hook up your TV, use the
table at right to select the VCR2 channel.
3. Press MENU to continue.
If you used
Connection A
Connection B
Connection C
Connection D
Connection E
Connection F
Connection G
Connection H
Connection I
Select
Not Connected
Not Connected
Video 2 Input
Ch3 Antenna A*
Video I Input
Not Connected
Not Connected
Video 2 Input
CH3 Antenna A*
* Or Chh4 Antenna A, depending on
how yourVCR's 3/4 switch is set.
2O