ProScan PS32130 User Manual page 49

Channel 3 Antenna B Choose this if your VCR is connected to the
Antenna B jack on the back of the TV, and you want the TV to
tune to channel 3 when you press the VCR1 button. Reminder:
Make sure the component's Ch 3/4 switch is set to channel 3.
Channel 4 Antenna B Choose this if your VCR is connected to the
Antenna B jack on the back of the TV, and you want the TV to
tune to channel 4 when you press the VCRI button. Reminder:
Make sure the component's Ch 3/4 switch is set to channel 4.
Video I Input Choose this if your VCR is connected to the Video
1 jacks on the back of the TV and you want the TV to tune to
Video I input when you press the VCR1 button.
Video 2 Input Choose this if your VCR is connected to the Video
2 jacks on the back of the TV and you want the TV to tune to
Video 2 input when you press the VCR1 button.
Set DVD/VCR 2/LD Channel Displays a choice list that lets you select
the channel that the -IV tunes to when you press the DVD.VCR button.
The choices are the same as those listed under Set VCR 1 Channel, a-
bove, except that the component is the second VCR or laserdisc player,
and the remote button being programmed is DVD.VCR. For example:
Video 2 Input Choose this if your second VCR or laserdisc player
is connected to the Video 2 jacks on the back of the "IV and you
want the TV to tune to Video 2 input when you press the DVD,VCR
button. This is a typical setting for a second VCR or laserdisc player.
Set DSS/Cable Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the SAT.CABLE button.
I
Usually, SAT,CABLE can control either a satellite receiver connected to
the Video 1 input jacks, or a cable box connected to the Antenna A jack.
The _hoices are the same as those listed under Set VCR 1 Channel,
above, except that the component is either a satellite receiver or a
cable box, and the button being programmed is SAT.CABLE. Here is
an example for each:
Video 1 Input Choose this if your satellite receiver is connected to
the Video 1 jacks on the back of the -IV and you want the TV to
tune to Video 1 input when you press the SAT,CABLE button.
(This is the typical setting for a satellite receiver.)
46