Programming The Remote To Control A Laserdisc Player; Programmmg The Remote To Control An Audio Device - ProScan PS32130 User Manual

Programming the Universal Remote to Control a
Laserdisc Player, DVD Player, or Second VCR
The remote's DVD*VCR button is preprogrammed to control the
primary functions of an ProScan, RCA, or GE DVD player. If you
would like this button to control a component other than a DVD
player, you can program the remote to control a laserdisc player or
VCR. For a ProScan, RCA, or GE component, just use the codes shown
to the right. (The previous page lists codes for other brands of VCRs). If
you ever need to reprogram the remote to control a DVD player,
laserdisc player, or second VCR, use the codes shown to the right.
I. Turn on the laserdisc player, DVD playe_, or second VCR.
2. Look up your brand and its code number(s) on code list at right.
3. Press and hold the DVD,VCR button on the remote.
4. Enter the two-digit code from the code list.
5. Release the DVDoVCR button and press POWER or another button
to see if the laserdisc player or DVD player responds to the remote
commands.
6. Repeat these steps using the next code listed for your brand, until
the laserdisc player, DVD player, or second VCR responds to the
remote commands.
Programming the Universal Remote to Control an
Audio Device:
,
2.
3.
4.
5.
Your remote controls only RCA audio equipment such as a radio, CD
player, tape p'rayer, turntable, or amplifier. The remote may need to be
programmed for your equipment. This remote may not operate all
modehi of the brands that are shown at right. Use the codes shown or
on the sheet packed in with your remote.
Turn on the component to be programmed.
Look up your brand and its code number(s) on the code list at right.
Press and hold the AUDIO button.
.
Enter the two-digit code from the code list.
Release the AUDIO button and press POWER or CHAN UP
or DOWN to see if the audio device responds to the remote
commands.
Repeat these steps using the next code listed for your brand until
the audio device responds to the remote commands.
RCA, ProScan, or GE Codes 1
VCR ......................................... 33,37
Laserdisc player..................... 33,37
DVD player................................. 78
Audio Codes
RCAJ Dimensia
AM/FM ......................................... 03
CD ................................................ 07
Tape .............................................. 06
Phono ........................................... 05
Aux ............................................... 04
26