ProScan PS27123 Owner's Manual page 33

After the
AUDIO
button is programmed, the buttons described
below will operate the basic functions of most audio equipment.
Depending on the age, brand, model, and type of audio
equipment, some models may not be able to respond to all the
function buttons listed. You will want to experiment with each
button to determine the exact function for your component.
Remote Buttons That Control Audio
Equipment
POWER B UTTON P ress to turn on
component. Press again to turn off.
Some components will turn on
automatically when you
AUDIO
button.
PLAY BU'R'ON
Press to start component
playing.
REWIND B UTTONPress while component
is stopped to rewind tape.
RECORD
BUTTON Press to start recording.
NUMBER B UTTONS P ress two numbers to
select a channel directly.
AUDIO BUTTON
Press this button to turn on
the audio component and put remote in
"Audio Mode" so other buttons will
control the audio component. Press the
TVbutton to put remote back into "TV
mode".
FAST FORWARD BUTTON
Press while
component is stopped to fast forward
tape.
PAUSE BUTTON
Press
to
pause play
or
record. To release pause, press again.
STOP BU'I'rONPress to stop whatever
the
component is doing: playing, recording,
rewinding, etc.
CHANNEL UP OR DOWN BUTrONS
Press to
select the next higher or lower channel
in the component's channel memory.
BUTTONPerforms
various
functions depending on the type of
equipment. Experiment with this
button.
29