ProScan PS27123 Owner's Manual page 29

Cable Box Channel Setup
The CABLE C HAN function lets you program to which channel
the TV will automatically tune when you press the
DSS.CABLE button on the remote. This is handy if you have
to connect a cable box to your TV. You will no longer
have to remember the output channel of the cable box
because the TV will remember for you.
For example, if you connect a cable box to the TV's
CABLE/ANTENNA
connector (as shown on page 35), you will
no longer have to remember to select channel 2, 3, or 4 on
the TV to see what's coming from the cable box. By
entering the cable box's output channel (usually 02, 03, or
04) next to the CABLE CHAN function, the TV will
automatically tune to that channel each time you press the
CABLE b utton on the remote.
This function is especially convenient if you have a
remote-controllable cable box that can be operated by the
DSS-ABLE b utton on the remote as described on page 39.
Pressing the DSS.CABLE button will then not only switch the
remote to cable mode but will also automatically tune the
TV to the proper channel for viewing the picture from the
cable box.
Setting Up Cable Box Channel
with or withoutremote
1 Repeatedly press the MENUbutton to select SETUP MENUand
then press + to display the setup functions.
2 Repeatedly press MENUto select the CABLE CHANfunction.
Enter the channel number you want to program by pressing
two digit buttons on the remote control. (The channel
number you enter is the channel to which the TV will tune
automatically when you later press the CABLEbutton on the
remote). The TV will change to the channel you select. This
will help you to confirm that it is indeed the channel you
want the TV to automatically tune. Most cable boxes output
their signals on either channel 02, 03, or 04.
4 Press the + button to program the channel number you
selected into the
CABLE CHAN
function memory.
Note: Pressing the - button here will turn off this feature and
display CABLECHAN: OFF again.
25