ProScan PS27123 Owner's Manual page 10

Remote Controls: TV Functions continued
The ProScan universal remote that came packed with
your TV also controls most brands of VCRs, cable-TV
boxes, and selected RCA audio equipment.
The remote is easy to use. The buttons shown below can
be used to operate your TV. The rest of the buttons are
used to control VCRs and cable boxes and are explained
on pages 26-29, and 39.
For added convenience, the simplified 6-button remote
also lets you control the basic operation of the TV
(shown on the previous page).
®
G
®
C
®
_ POWER BUTTON off the I_.
tunis
Q0 DISPLAY BUTTONdisplays iime (if clock has been set) and.
channel number on the TV screen. Also quickly removes
•menus and displays from the screen.
• . . . .-
_ voLuMEBUTTONS
Press
VOLUME up to
increase volume,
or press VOLUME
down to decrease volume. Tile volume display will
automatically appear on the screen whenYou press the
VOLUME buttons. '
_MUTE BUTTON
Press MUTE to quickly reduce sound to its minimum level
without affecting the picture. Th(s is very useful during
telephone calls or other interruptions. When sound is
• mute,d, the.word MOTE will appear on the screen. To
restore sound, press MUTE again, or prcss VOLUME up.
®
®
®
@
®
®
CHANNEL B UTrONS
PressCHANNEL up to selg
the next higher channel in
memory, or press CHANNEL down to see the next lower
channel in memory. Channels 2 through 13 and 91 were
programmed into the channel memory for you at the
factory. Your TV will automatically program active
Channels for your area into memory when you start ihe
AutoProgram feature described on page 21.
NUMBER BUIXONS let you select channels
directly instead
of using the CHANNEL buttons• Always press two number
buttons (first one, then the other) to select a channel. For
example,, press 0 then 6 for channel 6.
To sel'ect a 3-digit cable channel (li((e 127), press and
hold number button 1 until "1 -'-" appears on the screen.
Then press the other two numbers." Your TV will tune up
to cable channel number 128 when the CABLE/AIR function
is set to CABLE. Check with your cable company to
determine which channels are available in your area.