ProScan PS27123 Owner's Manual page 16

Audio Menu" Basic Functions
1. Repeatedly
press MENU to
select AUDIO Mute
Video Menu
MENU. _ W'=UK0.OML_E==,,
S_Up Menu
2. Then press + or - to
display the audio menu.
3. Repeatedlypress
MENU to select a
rir_Jl] l
Bass -._L L,,+
function, then press + Balance -.......I
........
4- MENU
i
or-to adjustit. Stereo/SAP:Stereo i
Expand
Stereo:Off
O
Speakers: Off
Pressing MENU moves down the screen (one item per pre_s).
The audio menu will •automatically disappear from the
screen if you do not press + or - within a few seconds.
Via remote control, your TV will "remember" which
• .function you displayed.last, even .after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or - button on the
remote control. The last function you adjusted will
•reappear on the TV screen,
TREBLE adjusts the high frequency audio. Press + to increase
treble, or press - to decrease treble.
BASSadjusts the low frequency
audio. Press + to increase bass, or
press - to decrease bass.
BALANCE adjusts the left/right balance of sound from the speakers.
When adjusting the balance, sit in your normal viewing seat while
pressing the + or - button until the sound seems to originate from
a point halfway between the speakers.
STERE0/SAP lets you choose either monaural or stereo audio, or
SAP audio (when it is available) by pressing the + or - button.
Normally. you can leave this function set to STEREO.and your TV
will automatically produce either monaural or stereo audio
whichever is broadcast. Details about stereo tuzd SAP are. on
., .* , .
page 13.
EXPANDEDSTEREOcan be turned ONor OFFby pressing ÷ or-.
This feature adds greater depth and dimension to stereo
broadcasts. You. will probably want to leave this function turned
ON so your TV will automatically expand the stereo signals
whenever a stereo broadcast is received (or whenever a st.ereo tape
is played though a stereo VCR connected to the TV's audio/video
jacks labeled
INPUT ) .
Details about expande d stereo are on
page 14.
•SPEAKERS ON/OFFlets you turn off the TV's speakers by pressing.
+ or -. You will probably w.ant to leave the TV's speakers turned
on unless you connect an amPlifier .(with its own set of speakers)
to 'the appropriate jacks on tl_e back of the TV as ddseribed on
page 44. Turning this function off, lurns off not only the TV's -
internal speakers but also any external or surround spe_ikers
connected to the TV's speaker terminals. Sound wilt then only
come through the speakers connected to th( amplifier, •since the
TV's speakers are turned off.
12