ProScan PS27123 Owner's Manual page 32

The digital remote control that came packed with your TV
is capable of controlling some audio equipment, such as a
radio, CD player, tape player, turntable or amplifier. The
remote may need to be programmed for your equipment.
This remote may not operate all models or brands listed.
To program the remote just press and hold the AUDIO
button, then enter the two-digit code number for your
brand of audio equipment from the chart below.
1 Press and hold the AUDIO button on remote.
2 Press two number buttons to enter the code number
for your brand of audio equipment.
3 Point the remote at the audio equipment and press the
AUDIO button to test the code number.
• If the right number was entered, the audio
equipment will turn on.
• The POWER b utton will turn the device off.
Operating Notes:
After the AUDIO button is programmed, the buttons described on
the next page will operate the basic functions of most audio
equipment. Depending on the age, brand, model, and type of
audio equipment, some models may not be able to respond to all
the function buttons listed. You will want to experiment with
each button to determine the exact function for your component.
Dimensia
RCA
AM/FM
03
03
TAPE PHONO AUX
06 05 04
06 05 04