ProScan PS27123 Owner's Manual page 19

Setup Menu: Basic Functions
1. Repeatedly
press MENU to Mute
Video Menu
select SETUP AudJo.Meau.
MENU. _ l['_'-:-':_'--'_'J[='.-
2. Then press+ or- to
display the setupmenu.
3. Repeatedly press
MENU to select a
function,then press+
or-to adjust it.
Sleep Timer O:OO
Set Alarm
ChanLabel
Parental Ctrl:Off
Chan Ctd: Normal
Autoprogram
Chan Mem: Stored
Antenna:; A
Cable/Air: C able
.V_CR ! :
II
Pressing MENUmoves down the screen (one item per press).
The setup menu will •automatically disappear from tile
screen if you do not press + or - within a few seconds.
Via remote.control, your TV will "remember" which
function you displayed last, even after the menu has
disappeared from the screen. So,if you want to adjust the
same function again, simply press the + of - button on the
remote control. The last function you adjusted Will
reappear on the TV screen. •
CLOSED CAPTIONING
lets you display the audio portion of a program
as text on the TV screen. Details are.onpage 16.
SLEEP TIMER lets you program your TV to turn itself off after a
certain period of time: This is useful whenever you want to
watch TV for a selected length of time before going to sleep.
Press the + or - button to select the length of time you want the
TV to stay on. Details are on page 17.
The ALARM function lets you program your TV to turn on and/or
offat the time you choose. Details are onpage 18.
CHANNEL LABELING l ets you program names (or labels) tk)r the
channel numbers. The names you select wi!l then appear on the
screen whenever the channel number is displayed. Details are on
page 19.
The
PARENTAL
CONTROL
feature lets you lock out any channels
between 1 and 99 that you don't want your children to watch.
Pressing + or - switches this function from OFF to ON. When this
function is set to ON, channels that have been locked out with the
CHANCTRLfunction cannot be viewed. When this function is set
to OFF, all channels can be viewed. Details are on page 20.
The CHANNEL
CONTROL function works hand-in-hand with the
PARENTAL CONTROL
function. It lets you select the channels
between 1 and 99 that you want to lock out. First select the
channel number you want to lock out and then press + or - to
change this function from
NORMAL
to LOCKED. W hen the
PARENTAL CONTROL
function is set to ON, the channels you locked
with this function cannot be viewed. Details are on page 20.
AUTOPROGRAM commands the TV to automatically cycle through
all channels and place only active channels for your area in its
channel memory. Pressing the CHANNEL up or down buttons will
then only stop on active channels. Details are on page 21.
CHANNEL
MEMORY i s the list of channels the TV will stop on when
you press the CHANNEL up or down button. This display lets you
add or erase channels as desired. Details are onpage 21.
ANTENNA
A/B --
Because your TV has two separateantenna, inputs
on the back labeled
ANT A
and
ANT
B, you can connect two
different signal sources, if desired. By pressing + to change this
display, you can switch back and forth between the two signal
sources..Each time you press +,.the antenna input will.change.
Details are on page 24.
The CABLF.JAIR
function tells your TV whether you have a Cable-
TV system or.a home antenna connected to the TV. Your TV is
so automatic that you will probably never need to change this
function. When your TV autoprograms, it automatically adjusts
the:CABLE/AIRsetting for you. If you should ever need to override
the automatic setting, press + or - to change it. :
The VCR t CHANNEL function lets you program to which channel the
TV will automatically tune when you press the vcm button On
the remote. Details are On page 23.
The VCR z CHANNEL function lets you program to which channel the
TV will automatically tune when you press the VCR2button on
the remote. Details are on page 23.
The DSS/CABLE CHANNEL function lets you program to which channel
the TV will automatically tune when you press the CABLEbutton
on the remote.
Details are on page 25.
•
CLOCK SETallows you to set the clock so you'll be able to see the
on-screen time display whenever you change channelsor press
the TVor DISPLAY button on the rcmote control. To set the clock,
first press and hold the- button until the correct hour appears,
Then press and hold the + button until the correct minute
appears.
15