ProScan PS27123 Owner's Manual page 14

Front Panel Controls
TIMEANDCHANNEL N UMBER DISPLAYS s how the current time
(once set) and channel number whenever you turn on the TV,
change channels, or press the remote's DISPLAY b utton. These
displays also appear whenever you change volume with the
VOLUME b uttons on the front of the TV.
REMOTE C ONTROL SENSOR receives commands from the
remote control. When using the remote control, point it
toward this sensor.
POWER INDICATOR l ights whenever the TV is turned on.
\
/ VOLUME BU'FrONS
Press VOLUME u p to increase volume, or press VOLUME d own
to decrease volume. The volume display will automatically
appear on the screen when you press the VOLUME buttons.
-- POWER BU'FrON
Press once to turn on TV: Press again to turn off TV.
\
STEREO HEADPHONE JACK lets you connect an optional
headphone to enjoy private !istening•with0ut disturbing
• others. If the •plug on your headphones does not fit this jack,
adapters are available from your local electronics supply
store. : :
Plugging in headphones will not automatically mute the sound
from the TV. This specia! feature enables someone with a
hearing impairment to attach a set of headphones with
separate volume control and enjoy a program with Others ifl
the s_ime room listening at a lower volume. You can also
enjoy'private listening if desired. Here's how to completely
mute the sound except for what's coming through the
headphones.
1 Change the SPEAKERS: ON/OFF function, to the
OFF
setting as
described on page 12.
2 If an optional amplifier is connected to tile TV, turn off the
amplifier to prevent soimd fi:omdoming through it.
CHANNEL B UTTONS
Press CHANNEL ^ to see the next higher channel in memory,
or press CHANNEL V to see the next lower channel in memory.
Your TV will automatically, program, channels into the
channel memory for you when you start the AUi-OPROGRAM
feature described on page 21. You can also add Orerase •
individual channels as desired as described on page 22.
MENUBUTr0N
Press MENU repeatedly until the menu you Want to display is
selected, then press + or-.,,Next press MENO repeatedly to
select the function you wan_ toadjust, and then press + or-
to adjust the setting. Details about Using each function begin
on page. 11.
_--- AND+BUTrONS
Use these buttons to enter or adjus_ functions after•you have
pressed the MENU button.
10