ProScan PS27123 Owner's Manual page 26

Setup Me#u:
Basic Functions continued
Erasing/AddingChannelsin ChannelMemory
with or without remote
1 Repeatedly press the MENUbutton to select SETUPMENUand
then press + to display the setup functions.
Adding Video Input Channels to Channel Memory
with or without remote
As an added convenience, you can also add video input
channels (90, 91, and 92) to memory. If you have a video
device such as a VCR, camcorder, laser disc player, etc.)
connected to the S-VIDEO or INPUTjacks on the back of the TV,
you can view its signal either by directly selecting Channel 90
(for S-VIDEOconnector), Channel 91 (for INPUT1), or Channel
92 (for INPUT2) with the number buttons or by adding those
channels to the Channel Memory.
2 Repeatedly press the MENUbutton until CHANMEM is selected.
Antehfia! A ...........
Adding Channels 90, 91, and 92 to the Channel Memory
allows access to the video inputs at the TV by pressing
the CHANNEL up or down buttons as well as by using the
remote control.
3 To erase a channel, first press the CHANNEL up or down button
until the cfiannel number you waiat to erase appears On ihe
screen. Then press -.
To add a channel, first enter two number buttons for the
channel you want to add. For example, press "0" then "6" for
Channel 6. (If the remote is not handy, you can press the
CHANNEL
up or down button onthe TV to select the channel
youwant to add). Then press +.
4 Repeat step 3 for each channel you want to erase or add.
Note: The menu will automatically disappear from the screen a few
seconds after you have finished erasing or adding channels. You can
make it disappear more quickly by pressing the CLEAR b utton on the
remote control.
22