Display Button; Microphone; Demonstration Mode; Quick Review Feature - RCA CC4392 User Manual

DISPLAYButton REW/REVIEWButton
Zoom
(T and IO
VCR Switch
DISPLA Y Button
The DISPLAY button lets you remove the
battery level, steady pix, tape speed, tape
counter with memory stop, remaining
tape display, index, fade, zoom and
digital effects indicators from the
viewfinder or LCD monitor.
• Press DISPLAYto remove the
indicators.
• Press DISPLAY again to display the
indicators.
Microphone
The microphone picks up the sound
during a recording. It is more sensitive
to sounds coming from the direction the
lens is pointed.
Demonstration Mode
Your camcorder has a demonstration
mode that begins whenever the
camcorder's power has been left on for
more than ten minutes without a cassette
inserted and the date has not been set or
the built-in clock battery is not charged.
28
To cancel the demonstration mode,
remove and reattach the power source or
insert a cassette.
Note: To prevent the demonstration mode
from starting, set the date and make sure the
built-in clock battery is charged.
Quick Review Feature
Press and release REW/REVIEWwhen the
camcorder is in record-pause to review the
last few seconds of a recording. The
CAMERA/OFF/VCR switch must be set to
CAMERA.
The camcorder will play back the last few
seconds of the recording, return the tape to
its previous position, and return to record-
pause.
AutoShot
TM
Feature
The camcorder automatically adjusts
focus, white balance, iris, shutter speed,
and light according to the recording
conditions.