Phone Line Busy
These are possible causes and solutions. Try one or more of the following:
C
HANGE REDIAL SETTINGS
The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial
up to five times at intervals up to 8 minutes.
To change the redial settings:
1
From the control panel, press Fax Mode.
2
Press .
3
Press
or
repeatedly until Fax Setup appears.
4
Press
.
5
Press
or
repeatedly until Dialing and Sending appears.
6
Press
.
7
To change the number of times the printer will redial:
a
Press
or
repeatedly until Redial Attempts appears.
b
Press
.
c
Press
or
repeatedly until the setting you want appears.
d
Press
.
8
To change the length of time between redials:
a
Press
or
repeatedly until Redial Time appears.
b
Press
.
c
Press
or
repeatedly until the setting you want appears.
d
Press
.
S
CHEDULE TO RESEND FAX AT A LATER TIME
See "Sending a broadcast fax at a scheduled time" on page 26.
Phone Line Error
These are possible causes and solutions. Try one or more of the following:
R
EVIEW DIGITAL PHONE SERVICE CHECKLIST
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone
services can be used.
•
If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface
port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN
provider.
•
If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your DSL provider.
Troubleshooting
51