Aastra 480i User Manual page 41

Configuring Ring Tones and
Tone Sets
Use the following procedures to
configure ring tones and tone sets
on the IP phone.
IP Phone UI
(global configuration only)
%
1. Press on the phone to
enter the Options List.
2. Select Tones.
3. Select Set Ring Tone.
4. Select the type of ring tone
(Tone 1 through Tone 5, or
Silent).
5. Select Set and then select Next.
6. Select Tone Set.
7. Select the country for which you
want to apply the tone set. Valid
values are Australia, Europe,
France, Germany, Italy, UK, and
US. Default is US.
8. Select Set.
The ring tone and tone set you
select is immediately applied to
the IP phone.
Aastra Web UI
1. Click on Basic Settings->
Preferences.
For global configuration:
2. In the "Ring Tones" section,
select a country from the "Tone
Set" field.
3. Select a value from the "Global
Ring Tone" field
Note: See the Ring Tone Settings Table
on page 34 for valid values.
For per-line configuration:
4. In the "Ring Tone" section,
select a line for which you want
to set ring tone.
5. Select a value from the "LineN"
field
.
Note: See the Ring Tone Settings Table
on page 34 for valid values.
6. Click
tings. These changes are not
dynamic. You must restart your
IP phone for the changes to take
affect.
7. Click on Operation->Reset.
8. In the "Restart Phone" field
click to restart the IP
phone and apply the ring tone.
480i IP Phone User Guide
.
to save your set-
35