Picking Up Calls; Ending Calls - Aastra 480i User Manual

5. If you do not wish to add the
new party to the conference,
press the Nbutton while
connected to this new call. This
disconnects the new party,
leaving the original call on hold.
To go back to the original call,
press the line/call appearance
button for this call.
6. If you wish to add the new
party to the conference, press the
= button again.
an 01 10:10am
L1 Conference
1202
>
Michelle LeBlanc
Drop
7. To drop a party from the
conference, use the navigational
keys to navigate to the desired
party's call appearance screen or
press the Next and Previous
softkeys (if visible), and then
press the Drop softkey.
an 01 10:10am
L2 Conference
1203
>
uan Perez
Drop
Note: If you disconnect from the
conference, the other two parties
will also disconnect.
01:33
Next
01:52
Previous

Picking up Calls

If you are juggling multiple
calls, you can scroll through call
information by pressing the
4
navigation keys. If you wish to
connect to an incoming call or
re-connect to a call you placed on
hold, press the line/call
appearance button for the call or
press the Pickup softkey.
an 01 10:10am
L1 Hold
1202
>
Michelle LeBlanc
Pickup
If the phone is already connected
to a call, pressing the line/call
appearance button for the new
incoming call will automatically
place the connected call on
hold and answer the new call.

Ending Calls

To end a call, you first need to
connect to the call, if not already
connected, and press the N
button or the Drop softkey. If
connected through the handset,
you can also place the handset
back on hook to end the call.
480i IP Phone User Guide
3
and
00:54
21