How To Use The Pulse Sensor - LIFESTYLER LS elite 780 Owner's Manual

HOW TO USE THE PULSE SENSOR
"the LS ELITE 780 treadmill features an innovative headband-style pulse sensor. The rubber-armored pulse sen-
sor and lightweight headband are specially designed for greater accuracy, comfort and durability• To get the best
performance from the pulse sensor, please read the following instructions•
ADJUSTING THE HEADBAND
1• The headband should fit snugly around your head, without
being uncomfortable. If the headband needs to be adjusted,
slip the headband off the adjustment tab on the pulse sen-
sor. Insert the adjustment tab through a different hole in the
headband.
ustment
.
Rub your forehead to stimulate circulation. Put on the head-
band as shown. Make sure that the sensor window is cen-
tered on your forehead. If necessary, adjust the headband
as described above. IMPORTANT: To avoid static build-
up, the pulse sensor should be worn only while you are
standing on the treadmill•
Find the clip that isattached to the pulse sensor wire, and
• % • . • • •
shde the cbp onto your collar. The chp w=llmtmm ze move-
ment of the wire during exercise, helping to ensure accurate
pulse readings.
Cli
Sensor
/
8
HOW TO oBTAIN ACCURATE PULSE READINGS
The instructions on pages 11 and 12 describe how to use the pulse sensor with the console. To ensure the best
results, remember the following important guidelines:
1. Make sure that the headband is properly adjusted• If the headband is too tight or too loose, your pulse may
not be detected.
2. Before putting on the headband, rub your forehead to stimulate circulation.
3. Make sure that the headband is worn properly, with the sensor window centered on your forehead.
4. Avoid excessive head movement during exercise.
5, Make sure that the pulse sensor wire is fully plugged intothe jackon the console. -
6-" Periodically clean the sensorwindow using a cotton swab moistened with denatured alcohol.
WASHING THE HEADBAND
The headband can be removed from the pulse sensor and washed• Hand wash the headband in mild detergent•
Gently wring out the headband and let it dry. The pulse sensor can be wiped clean with a damp cloth; do not
Immerse the pulse sensor In water.