LIFESTYLER LS elite 780 Owner's Manual page 15

key
and UNPLUG THE POWER CORD. Using the belt tool, turn
the rear roller adjustment bolt counterclockwise 1/4 of a turn.
Plug in the powercord,insertthe safety key and runthe tread-
millfor a few minutes.Repeat untilthewalkingbelt is centered.
STORAGE
o
Unplug the power cord when the treadmill is not in use.
Remove one bolt and washer from the lower ends of the left
and right uprights. Loosen the other bolt on each side.
Carefully lay the console on the treadmill. Keep the bolts and
washers in a secure location.
It is recommended that the treadmill be covered during extend-
ed periods of storage.
_'Belt Tool U
15