Jenn-Air PRO-STYLE JGS8860BDP17 Use & Care Manual page 17

Baking
To set Bake:
1. Press the Bake pad.
2. Select the oven temperature using the Quickset pads.
OR
Enter the desired temperature using the number pads.
Press Enter pad to set.
The temperature can be set from 170° F to 550° F
in 5 ° increments.
After three seconds, the oven will begin to preheat.
BAKE and PREHEATwill appear in the display along
with 100° or the actual oven temperature, whichever
is higher.
4
.
The temperature in the display will increase in 1o
increments until the oven reaches the preset
temperature. Allow about 15 minutes for the oven
to preheat.
, When the oven is preheated, the oven will beep and
PREHEATwill no longer be displayed.
At the end of cooking, turn the oven off by
pressing the CANCEL pad. Remove food
from the oven. The oven will continue
operating until the CANCEL pad is pressed.
i CANCEL
.............................. /
Notes:
, if more than thirty seconds elapse between pressing a
pad and pressing a number pad, the display will return
to the previous display.
Whenever the temperature appears in the display, the
oven is heating.
To change the oven temperature during cooking, press
the Bake pad and select a displayed temperature or use
the number pads to enter the desired temperature.
The oven will automatically shut off after 12 hours if it is
accidentally left on. To set a Sabbath Mode, see Sabbath
Mode, page 27.
Bake Options
Cook & Hold and Delay options are available when baking.
When using the Cook & Hold option, the oven begins to heat
immediately after the control has been set. Then, the oven
cooks for a specified length of time. When that time has
elapsed, the oven will automatically reduce temperature to
170° F and keep the food warm for up to an hour and then
automatically turn off.
When using Delay, the oven begins to cook later in the day.
Set the amount of time that you want to delay before the oven
turns on and how long you want to cook. The oven begins to
heat at the selected time and cooks for the specified length of
time. When that time has elapsed, the oven will keep the food
warm for up to an hour then automatically turn off.
To set Cook & Hold:
1. After Bake has been programmed, press r_,-, ,::'-
the More Options pad.
,..,Ft,ons/
2. Select COOK/HLD.
3. Select the amount of time you want to bake by pressing
the Quickset pads or the number pads.
4. Press Enter pad.
5. COOK TIME, the cook time countdown, PREHEAT,BAKE
and the actual temperature will be displayed.
The oven will cook for the selected time, then keep food warm
for one hour.
To set a Delay:
1. After Bake has been programmed, press
the More Options pad.
2. Select DELAY.
3.
4.
5.
,_ M0re,
Options
\ ......................................................
Select the amount of time you want to delay the start of
cooking using the displayed times or the number pads.
Select the amount of time you want to cook using the
displayed times or the number pads.
The display will show BAKE, the temperature, the delay
time and the cook time countdown.
6. When the delay time has expired, the oven will begin
heating. COOK TIME, the cook time countdown, PREHEAT,
BAKE and the actual oven temperature will be displayed.
16