Assembly - LIFESTYLER Inckine Lift assist 1900 Owner's Manual

ASSEMBLY
Set the treadmill in a cleared area and remove the packing materials. Make sure that all parts are
included before disposing of the packing materials. Please read each step carefully before
beginning. Assembly can be completed using a standard screwdriver (not included).
°
Raise the Upright Post (13) to a vertical position.
Insert the Lock Knob (25), with the Lock Knob
Washer (24) into the Upright Post, and turn the Knob
clockwise until almost tight. Leave a little play in the
Upright Post for the following steps.
24 25
.
Slide the upper end of the Left Side Rail (1) into the
opening in the left side of the Console (10). Insert the
Short Side Rail Bolt (12) through the metal plate
under the Console, and tighten the Bolt into the Side
Rail. Repeat the step with the Right Side Rail (2).
Note: If a Side Rail cannot be inserted into the
Console far enough to attach the Bolt, roll back the
Side Rail Foam ( 3 ) slightly.
10
.
Align the hole in the lower end of the Right Side Rail (2)
with the hole in the Frame (47). Attach the Right Side
Rail with the Long Side Rail Bolt (75), Formed
Washer (66) and the Side Rail Washer (39). Repeat
the step with the Left Side Rail (not shown). Tighten
the Lock Knob (See step 1).
47
66
4