Operation And Adjustment; Grounding; Silicone Application - LIFESTYLER Inckine Lift assist 1900 Owner's Manual

OPERATION AND ADJUSTMENT
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
DANGER: Improper
connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
.product is properly grounded. Do not modify the plug provided with the product - if it will not fit the
cutlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be
used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1)
can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from
the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle
outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet
box cover is grounded before using an adapter.
Grounded Outlet Box
Grounding P!ug
Grounded Outlet Box
!
Grounding Pin
SILICONE APPLICATION
To maintain the low-friction quality of the walking belt and
reduce treadmill wear, a non-oil, non-petroleum base
silicone lubricant should be applied generously to the
walking platform. (Silicone lubricant is available at most
hardware and automotive stores.) It is very important to
apply silicone lubricant before initial use of the treadmill.
Lubricant should also be applied after every 10 hours of use
or whenever a decrease in performance is noticed. Unplug
the power cord, lift each side of the walking belt and apply
the lubricant generously to the area indicated in the drawing.