Table of Contents
Advertisement
ASSEMBLY
Set the treadmill
in a cleared
area and remove
all packing
materials.
Be sure that all parts are
included
before
disposing
of the packing
materials.
Assembly
can be completed
using the allen
wrench
included,
and your own standard
screwdriver.
Refer to the Part List and Exploded
Drawing
on
pages
14 and 15 for help with part identification,
if necessary.
°
Raise the Upright
Post (9) to a vertical
position.
Insert
the Lock Knob (38), with the Lock Knob Washer
(37)
into the Upright
Post, and turn the Knob clockwise
until almost tight.
Leave a little play in the Upright
Post for the following
steps.
37
38
.
Align the upper end of the Side Rail (72) with the left
end of the Handrail
(14).
Turn the Handrail
as shown
to thread the Handrail
into the Side Rail.
(Note: If the
Handrail
will not turn easily, loosen the Handrail
Bolt
[16] slightly.)
Tighten the Handrail
and the Handrail
Bolt.
I I I i i
i I Ii
i ||
[--7
3
14
m
m
7
.
Align the lower end of the Side Rail (72) with the hole
in the side of the treadmill
Frame (58).
Attach
the
Side Rail with a Side Rail Bolt (70), Formed
Washer
(71) Side Rail Washer
(73) as shown.
Tighten the
Lock Knob (see step 1).
Make sure that all parts are tightened
securely
before
using the treadmill.
70
71
73
58
6
Hide quick links:
Advertisement
Table of Contents
