Lock Nut - Nautilus Be strong NS 600X Assembly Manual

STEP 3
75
42
16
77
74
Step 3 Components:
# Component
16 Pec Fly Mount
17 Pec Fly Cam
18 Right Pec Fly Arm
19 Left Pec Fly Arm
20 Pec Fly Handle
42 Plastic Cap
61 Hex Bolt 3/8" x 3 1/4"L
69 Cap Head Allen Bolt 1/4" x 1/2"L
Threadlock
72 1 3/8" x 1/2" Flat Washer
74 3/8" Flat Washer
75 Shim Washer
76

1/2" Lock Nut

77 3/8" Lock Nut
ASSEmBLY
18
72
76
61
Procedure:
a. Attach Pec Fly Mount (16) to Main Base using hardware shown. Tighten hard
Qty
B. Slide Pec Fly Cam (17) onto Left Pec Fly Arm (19) paying close attention to the
1
2
1
1
c. Repeat step B using the Right Pec Fly Arm (18).
2
D. Install Pec Fly Handle (20) in the Left Pec Fly Arm (19) using the hardware shown.
4
2
2
4
e. Repeat step D using the Right Pec Fly Arm (18).
4
f. Install Plastic Cap (42) in the four locations shown. The Plastic Cap (42) should
4
4
2
20
19
17
3 1/4"L
ware firmly.
orientation shown above. Attach the Left Pec Fly Arm (19) to the Pec Fly Mount
(16) using the hardware shown. Tighten hardware securely making sure that the
Pec Fly Arm can rotate freely.
Tighten hardware securely making sure that the Pec Fly Handle (20) can rotate
freely. Install Allen Bolt (69) to Pec Fly Handle (20) as shown. Tighten firmly.
NoTe: Make sure that the path of the Pec Fly Handle is similar to the path shown
in the Top View.
snap into place locking around the Shim Washer (75).
NoTe: Rubber Mallet may be needed to install Plastic Cap.
Path
69 1/2"L
Top View
Nautilus NS600X
11