Call Monitor Setting Menu - EverFocus EDSR-400 Instruction Manual

6.13 CALL MONITOR SETTING MENU

In the CALL MONITOR SETTING MENU, we define the sequences of each CH for call
monitor .
CH, DWELL, EVENT:
(1) CH (Channel): Select the camera to be shown in the standard sequence of this call
monitor. With setting "00" the channel will be skipped in the sequence.
(2) DWELL (Dwelling time): Set 0~99 seconds for the dwelling time of each camera.
(3) EVENT: Set the alarm and correspondent motion to the camera.
NONE: no alarm or motion action is assigned to this camera.
MOTION: If MOTION detection is active for this camera, the camera will be
displayed, if motion is detected. After alarm record duration the monitor switches
back to standard sequence or spot camera (depending on operation).
A01 ~ A06: The camera will be displayed, if selected alarm input is active.
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press ENTER key to confirm the option and move to next column.
ENTER
Press CALL key to confirm the option and move to previous column.
CALL
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
CALL MONITOR SETTING MENU
CH DWELL EVENT
00 07 SECS
00 07 SECS
00 07 SECS
00 07 SECS
(00 07 SECS
(00 07 SECS
Columns in brackets () only valid for EDSR-600
24
NONE
NONE
NONE
NONE
NONE)
NONE)
MENU