Cable Management - PEERLESS PRS-1 Installation And Assembly Manual

Cable Management

8
To make an opening to route cables through projector
mount assembly, adjust projector mount assembly to full
upward tilt position by turning knob for tilt adjustment
as shown in fi gure 8.2. Left or right roll position can be
adjusted if more space is required.
NOTE: Be certain tamper resistant screws are not
engaged before making adjustments (see step 9).
Route cables through top of extension column as shown
in fi gure 8.1 and fi gure 8.2.
NOTE: A method for assisting cables through extension
column may be required (example: string tied to connec-
tor to help pull through extension column).
Route cables through projector mount assembly as
shown in fi gure 8.2 and connect to projector.
SCREWS FOR PITCH
ADJUSTMENT
Visit the Peerless Web Site at www.peerlessmounts.com
EXTENSION
COLUMN
10 of 13
fi g. 8.1
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
ROUTE
CONNECTOR
THROUGH
FIRST
DO NOT
CRIMP
WIRES
fi g. 8.2
ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10
For customer care call 1-800-865-2112 or 708-865-8870.
NOTE: INNER DIAMETER OF
EXTENSION COLUMN MAY NOT
ALLOW PASSAGE FOR ALL
CONNECTOR TYPES.
CABLE
CONNECTOR
INNER
DIAMETER OF
EXTENSION
COLUMN
SCREWS FOR ROLL
ADJUSTMENT
OPENING FOR
ROUTING CABLES