Installation To Extension Columns / Ceiling Plate - PEERLESS PRS-1 Installation And Assembly Manual

Installation to Extension Column / Ceiling Plate
NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to
1
ceiling.
Screw projector mount assembly (A) onto extension column as shown in fi gure 1.1.
Tighten swivel stop screw against extension column, fl ush mount tube or reducer using 4 mm security t-wrench
(B) as shown in fi gure 1.2.
NOTE: Swivel stop screw is used to jam against threads of extension column, fl ush mount tube or reducer to
prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw
will damage threads making it diffi cult to separate products.
Skip to step 5.
SWIVEL STOP
SCREW
Visit the Peerless Web Site at www.peerlessmounts.com
A
fi g. 1.1
1 1/2" EXTENSION COLUMN
(SOLD SEPARATELY)
(UL LISTED EXT OR AEC SERIES)
BACK OF
MOUNT
fi g. 1.2
4 of 13
For customer care call 1-800-865-2112 or 708-865-8870.
CMJ 455
(SOLD SEPARATELY)
ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10