Power Input Connector; External Ac Universal Power Supply; Power Connection Barrel Receptacle 5 Vdc Diagram - Patton electronics RocketLink-G 3088 Series User Manual

Model 3088 Series User Manual
• Built-in testing and diagnostics
• RocketLink Plug 'n' Play for easy installations
• Interoperable with other Patton G.SHDSL modems
• Configurable as remote (CP) units
• Configurable as central (CO) units to operate back-to-back
• Front-panel status indicators
• CE marked

Power input connector

The RocketLink-G comes with an AC or DC power supply. (See section
tions" on page 73.)
• The power connection to the NTU is a 2.5 mm barrel receptacle with the center conductor positive
(see figure 2).
• Rated voltage: 5 VDC
A
Rated current: 1

External AC universal power supply

For additional specifications, see section
• Output from power supply: 5 VDC, 2 A
• Input to power supply: universal input 100–240 VAC 50/60 Hz 0.3A
CAUTION

Power input connector

Figure 2. Power connection barrel receptacle 5 VDC diagram
"Power and power supply specifications"
The external AC adaptor shall be a listed limited power source
that incorporates a disconnect device and shall be positioned
within easy reach of the operator. Ensure that the AC power
cable meets all applicable standards for the country in which it is
to be installed, and that it is connected to a wall outlet which has
earth ground.
"Power and power supply specifica-
5 VDC
1 • General information
on page 73.
16