NOTE: We recommend that the ceiling box be of suffi cient
capacity to support the weight of the fan and light fi xture
under any conditions.
Step 2. With the large washer attached, pass the lag screw
through the center hole of the crossbar mounting bracket and
screw into guide hole. Tighten until outlet box is mounted
fi rmly to beam. Th is box must be secured to the ceiling
fi rmly.
CANOPY HARDWARE
(not to scale)
Canopy Hatch
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2
1
1
1
washers provided with your Casablanca fan. Tighten using the
provided screwdriver until snug against the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.
LAG SCREW INSTALLATION
CANOPY INSTALLATION
Canopy
/
/
long canopy screws and lock
"
2
Lag Screw
Lag Screw
Canopy Lock Washer (4)
Feed outlet box wires
Feed outlet box wires
through canopy opening
through canopy opening
Large Washer
Canopy Screw (4)
Canopy
Canopy
Lock Washers
Lock Washers
Canopy Screws
5