Dryer Features - GE Profile DPGT750 Owner's Manual And Installation Instructions

Dryer Features
www. GEAppliances. corn
Changing the
Drum Lamp
Before replacing the drum lamp, be sure to unplug
tile dryer power cord or disconnect tile dryer at dm
household distribution panel by remoxdng the fi.lse
or switching off tile circuit breaker.
The drum lamp is located at tile top left of the door
frame.
1 Remove the screw holding the drum lamp shield
in place.
2 Slide the shield up and remove.
3 Remove the bult and replace with a 15-watt,
120-volt candelabra-base bulb.
4 Replace the lamp shield and screw.
Screw
Using the
Drying Rack
A handy drying rack may be used for drying delicate
items such as washable sweaters.
Hook the rack over the lint filter so tile rack extends
into tile dryer drum.
NOTE:
• The drying rack should only be used with the
TIMED DRY or RACK_DRY cycles. It is also
strongly recommended when dlTing sneakers.
• Do not use this drying rack when there are other
clothes in the dryer.
15