GE Profile DPGT750 Owner's Manual And Installation Instructions page 27

Installation Instructions
CONNECTING DRYER POWER
CORD (cont.)
[] For 3-wire Connection ONLY:
Be sure the dryer's green ground wire
is connected to neutral (center) terminal
of block and to green ground screw on
cabinet rear.
(3-wire Connection Shown)
For 4-wire Connection ONLY:
Remove and discard the dryer's ground
wire between the cabinet and the center
of the terminal block.
IMPORTANT: Do NOT remove the long
ground wire that runs down inside the
dryer cabinet.
Attach ground wire of power cord to the
cabinet with the green ground screw.
Power
Ground
Wire
(4-wire Connection Shown)
CONNECTING DRYER POWER
CORD (cont.)
[] For 3-wire and 4-wire Connection:
Connect the neutral (center line on 3-wire,
white line on 4-wire) line to the center of
terminal block.
Connect
(3-wire Connection Shown)
[] For 3-wire and 4-wire Connection: 33ghten
all terminal block screws completely.
(3-wire Connection Shown)
[] For 3-wire and 4-wire Connection:
Reinstall the terminal block access cover.
IMPORTANT: Do not leave the access
cover off.
(3-wire Connection Shown)
27