GE Profile DPGT750 Owner's Manual And Installation Instructions page 23

Installation Instructions
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
[] Attach the flexible metal gas line
connector to the adapter.
[] Tighten the flexible gas line connection
using two adjustable wrenches.
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
[]
Install a 1/8" NPT plugged tapping to the
dryer gas line shut-off valve for checking
gas inlet pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon ®
tape to the threads of the adapter and
plugged tapping.
Apply pipe compound or _[_
Teflon ®tape to all male _-:_'U /Plugged
threads. €" Tapping
Shut-off Valve -__11_
[] Tighten all connections using two
adjustable wrenches. Do not overtighten.
I
[] Open the gas shutoff valve.
23