GE Profile DPGT750 Owner's Manual And Installation Instructions page 14

Help
www. GEAppliances. corn
Setting the
Machine
Preferences
The machine settings on the Help feature
allow you to control the volume of" the button
beep and end-of-cycle signal, and turn the
washer/dryer communication feature
on OF off.
Press the HELP button, then select from the
on-screen options.
Button Beep
The button beep controls tile volume of" the
beep that is made when you press any of the
buttons on the control panel or Touch Screen.
To change the volume of the button beep:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from
the Touch Screen.
3 Select BUTTON BEEP from the Touch
Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the beep off.
5 Select OKfrom the Touch Screen.
The new volume is now saved as the default
setting.
Washer/Dryer Communication
Washer/Dryer communication allows your dryer
to receive cycle information from your vcasher to
create a dry cycle that matches your vcash load.
After the wash cycle is complete, communication
begins once either the vcasher or dryer Touch
Screen is activated.
Once the infbrmation is sent, your dryer can
then create the optimal dry cycle for your load.
To turn the Washer/Dryer Communication
feature on or off:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from the
Touch Screen.
3 Select WASHER/DRYER
COMMUNICATION from the Touch Screen.
4 Touch the pad at the bottom of the Touch
Screen to select ON or OFF.
5 Select OKfrom the Touch Screen.
MACHINE PREFERENCES
p I OOTTOMO I
_ WASNER/DFIYER J
COMMUNICATION )
End-ofCycle Signal
Tim End-of42ycle signal alerts you when the
cycle is complete.
To change the volume of the end_of_yde signal:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from
the Touch Screen.
3 Select END OF CYCLE SIGNAL from the
Touch Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the signal off.
5 Select OKfrom the Touch Screen.
The new volume is now saved as the default
setting.
14