GE Profile DPGT750 Owner's Manual And Installation Instructions page 9

Summary Screen
www. GEAppliances. corn
About the
Summary
Screen
After selecting a dry cycle, tile Summary Screen
displays the automatic settings for tile cycle you
have chosen. You can adjust these by touching tile
screen location for any of din settings shown.
If you change any of the automatic settings, you
can save tile new settings as a custom "My Cycle"
by pressing tile MY CYCLES button while on the
Summary Screen and choosing SAVE CURRENT
SETrINGS.
SUMMARY SCREEN
COTTONS MORE DRY
0:36
Changing the
Dryness
Level
To change the dryness level, touch tile DRYNESS
pad on the Touch Screen; then use the arrov_ to
select the level of dryness. Press OK when you have
reached the desired setting.
MORE DRY - Use for heavy_lury fhbrics.
DRY- Use fbr a normal dryness level suitable for
most loads. This is the prefizrred cycle for energy
saving.
LESS DRY - Use for lighter fhbrics.
DAMP - Use to leave items partially damp.
DRYNESS
MORE DRY
LESS DRY
DRY
Changing the
Drying
7_mperatu,_
To change the drying temperature, touch the
TEMP pad on the Touch Screen; then use the
arrows to select higher or lower temperature. Press
OKwhen you have reached the desired setting.
HIGH - For regular to heavy cottons.
MEDIUM - For synthetics, blends and items
labeled permanent press.
LOW- For delicates, synthetics and items labeled
Tumble Dry Low.
EXTRA LOW - For delicates, lingerie and special-
care fabrics.
AIR DRY- For tumbling items without heat.
TEMPERATURE
HIGHER
LOWER
EXTRA
LOW