GE Profile DPGT750 Owner's Manual And Installation Instructions page 36

Installation Instructions
REVERSING THE DOOR SWING (cont.)
[] REVERSE HANDLE
Install the handle on the opposite side of
the door.
Rear of Door
[] REMOVE HINGES AND REHANG
DOOR
Remove the hinges from the door and install
them on the opposite side with the hinge pin
toward the outside of the door.
Opposite Side of
Door
[] REMOVE HINGES AND REHANG
DOOR (cont.)
Insert the door on the opposite side of the
opening by moving the door IN and DOWN
until the top hinge and the bottom hinge are
resting on the top screws inserted in Step 2.
Remove the remaining screws from the
side of the opening from which the door
was removed. With these screws, secure
each hinge at the bottom.
Tighten the two top screws of each hinge.
Reinsert the plastic plugs on the side from
which the door was removed.
36