Troubleshooting Tips - GE Profile DPGT750 Owner's Manual And Installation Instructions

Problem Solver
www. GEAppliances. corn
For a complete list of solutions to common dryer problems, use the
Troubleshooting Tips feature located by pressing the HELP button
while on the dryer Home Screen (see Using the Troubleshooter).
If your dryer will not operate, check the Problem Solver below:
Problem Possible Cause What To Do
Dryer won't operate Control panel is asleep
• This is normal. Press POWER, tile
touch .screen or any button to activate
tile control panel.
Dryer is unplugged • Make sure cord is plugged securely into
a working oudet.
Controls are not set properly • Make sure tile cycle w_s set correctly,
close the lid and press START.
Fuse is blown/circuit breaker • Check house circuit breakers/fuses.
is nipped Replace fuses or reset breaker.
NOTE: Electric dryers use two fi.lses
or breakers.
Electronics need to be reset • Unplug drym; w_t 2 minutes, plug
back in and press POWER.
START was not pressed after • Press START.
a cycle was set
Door was opened during • Close the door and reset cycle, to the
tile dry cycle beginning if necessary, Press START.
Dryer is too cold • If the dryer has been exposed to
temperatures below freezing for an
extended period of time, allow it to
wctrm up before pressing POWER.
Otherwise, the display will not come on.
Normal
Operating
Sounds
The following are normal sounds you may hear:
Sound Description
Thumping noise when
drum rotates
• If the dryer has not been used fbr an extended period of time, you may
hear a thumping noise fi'om temporary fiat spots on tile drum support
rollers. The noise will go away after use.
41