Clean Filter; Dryer Features - GE Profile DPGT650GH Technical Service Manual

Dryer Features

_________________________________________________________________________________________

Clean Filter

The Clean Filter light will fl ash when the dryer is powered up. This is to remind the consumer to clean the lint
fi lter prior to starting the dryer. The Clean Filter light will stop fl ashing when the start button is pressed and
cycle started.
Changing the Drum Lamp
Screw
Before replacing the drum lamp, be sure to unplug the dryer power
cord or disconnect the dryer at the household distribution panel
by removing the fuse or switching off the circuit breaker. The drum
lamp is located at the top left of the door frame.
1. Remove the screw holding the drum lamp shield in place.
2. Slide the shield up and remove.
3. Remove the bulb and replace with a 15-watt, 120-volt
candelabra-base bulb.
4. Replace the lamp shield and screw.
Using the Drying Rack
A handy drying rack may be used for drying delicate items, such
as washable sweaters. Hook the rack over the lint fi lter so the rack
extends into the dryer drum.
Note:
• The drying rack should only be used with the TIME DRY cycle. It
is also strongly recommended when drying sneakers.
• Do not use this drying rack when there are other clothes in the
dryer.
– 9 –