Craftsman ZTS 7500 Operator's Manual page 7

SAFETY & OPERATION DECALS
This unit has been designed and manufactured to
provide you with the safety and reliability you would
expect from an industry leader in outdoor power
equipment manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and
effectively, we have placed several safety labels on the
unit to remind you of this important information while you
are operating your unit.
Decal - Amputation and
Thrown Objects Hazard
Part No. 1704277
Decal - Ground Speed Lever
Part No. 1734271
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.
If any of these decals are lost or damaged, replace them
at once. Contact a Sears Parts & Service Center for
replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
Decal - Cutting Height
Switch
Part No. 1734276
Decal - Control Panel
Part No. 1734272
Decal - Operation, Upper
Part No. 1734236
Decal - Operation, Lower
Part No. 1734207
Decal - Transmission
Release
Part No. 1720543
(Located on rear frame)
Decal - Cutting Height
Indicator
Part No. 1734335
Te _voJd initlr y from r0t_iill_
hJ_(le_, stay dear ef (leek e(
Decal - Ground Speed Lever
Part No. 1734270
Decal - Amputation Hazard
Part No. 1704276