Keep your hands out of the blade path,
WARN'NG: To avoid kickback, push ,orwarcl on,y
on the part of the workplece th_
will pass be
tween the blade and the fence
Stop your thumbs at the front edge of the table
Finish
the cut with the appropriate pusher
When"WIDTH OF RIP" s2 in. orwider USETHEPUSH
STICK to finish pushing the work all the way past the
blade.
When WIDTH OF RIP is 1/2" to 2 in., the push stick
CANNOT be used becausethe guardwill interfere. USE
the AUXILIARY FENCE/WORK
SUPPORT and PUSH
BLOCK.
Attach Auxiliary Fence!Work Support to Rip Fence with
two"C" clamps.
48