Overview Of The Hdlm Command Dlnkmgr - Hitachi XP P9500 User Manual

Overview of the HDLM Command dlnkmgr

This section describes how to specify the HDLM command dlnkmgr and its
subcommands (called operations in HDLM).
Command format
Enter the command using the following format:
dlnkmgr [connection-options] operation [parameter [parameter-
value]]
dlnkmgr
connection-options
operation
parameter
parameter-value
Enter the host connection options in the following format:
-s host-name -u user-name -p password
host-name
user-name
password
If you omit the -u or -p parameter, the command will prompt you to
enter a user name or password. In this case, enter the user name or
password as directed.
Note that you do not need to specify host connection options if the
following environment variables are set on the remote management
client:
¢
¢
¢
Operations of the dlnkmgr command
Table 6-1 Operations of the dlnkmgr Command on page 6-3
operations of dlnkmgr and their functions.
6-2
The command name.
The information required to log in to the target host.
The type of operation.
A value required for an operation.
A value required for an operation parameter.
The name of the target host.
The user name used to log in to the host.
The password used to log in to the host.
VI_SERVER: Host name
VI_USERNAME: User name
VI_PASSWORD: Password
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
shows the