Hitachi XP P9500 User Manual page 156

Message ID
KAPL01150-E
KAPL01151-E
KAPL01152-E
KAPL01153-W During the offline operation
8-22
Message Text
The HDLM command cannot be
executed because the VMware
vSphere CLI is not installed.
HDLM commands cannot be
executed because HDLM for
Windows is installed.
The operation was canceled
because the path configuration
is being changed. Operation
name = aa...aa
processing of the HDLM
command, a path that cannot be
placed in the Offline(C) status
was detected. PathID = aa...aa
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Details
The HDLM command was not
executed in the command prompt
of VMware vSphere CLI.
Action
Execute the HDLM command in
the command prompt of the
VMware vSphere CLI.
Details
HDLM for VMware and HDLM for
Windows cannot be used on the
same host.
Action
Remove HDLM for VMware and
install it on another host, or
remove HDLM for Windows.
Details
The operation was canceled
because the path configuration
was being changed during the
operation.
aa...aa: offline, online, or
view
Action
Check that the path configuration
is not being changed, and then
re-execute the operation.
Details
A path that cannot be set to the
Offline(C) status was detected
during multi-path offline
processing.
aa...aa: Path ID (decimal
(base-10) number)
Action
Execute the view operation the
HDLM command (dlnkmgr) to
check the path status. For details
on the view operation, see
(Displays Information) on page
6-22.
Messages
Explanation
view